Прошивка MikroTik RouterOS 6.47.10 | Скачать прошивку 6.47.10

Описание прошивки MikroTik RouterOS 6.47.10

Компания MikroTik обновила версию прошивки на канале long term до версии 6.47.10

Прошивку можно скачать с сайта https://mikrotik.com/download

Дата выхода прошивки: 31.05.2021

Версия прошивки 6.47.10 содержит такие доработки и исправления:

!) wireless — fixed all affecting ‘FragAttacks’ vulnerabilities (CVE-2020-24587, CVE-2020-24588, CVE-2020-26144, CVE-2020-26146, CVE-2020-26147);
*) bonding — improved system stability when disabling/enabling bonding ports;
*) branding — added option to upload custom files (newly generated branding package required);
*) capsman — use proper units for «ap-tx-limit» and «client-tx-limit» parameters;
*) console — do not clear environment values if any global variable is set;
*) console — require «write+ftp» permissions for exporting configuration to file;
*) console — updated copyright notice;
*) crs3xx — added «/system swos» menu for CRS354 devices, should only be used after SwOS 2.13 release;
*) crs3xx — fixed interface LEDs for QSFP+ and SFP+ interfaces on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx — improved 1Gbps Ethernet port group traffic forwarding for CRS354 devices;
*) crs3xx — improved system stability when receiving large frames on CPU for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) defconf — fixed default configuration loading on LHG R;
*) defconf — fixed default configuration loading on RBOmniTikPG-5HacD;
*) dhcp — fixed link state checking for DHCP client;
*) dude — fixed configuration menu presence on ARM64 devices;
*) ethernet — improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices;
*) ipsec — fixed SA address parameter exporting;
*) lte — fixed «earfcn» to band translation for «cell-monitor»;
*) ovpn — fixed route cache entry leak when establishing a new session;
*) poe — do not perform PoE firmware upgrade procedure on RB960 and OmniTik devices without PoE out;
*) ppp — do not fail «at-chat» command when issued on disabled PPP interface;
*) ptp — improved management service stability when receiving bogus packets;
*) quickset — prefer 5GHz interface for WiFi scan in CPE mode;
*) rb4011 — fixed SFP+ port MTU setting after link state change;
*) rb4011 — improved SFP+ port stability after boot-up;
*) route — improved stability when connected route is modified;
*) sfp — improved cable length monitoring as defined per SFF-8472 and SFF-8636;
*) supout — fixed «topic» column presence in «Log» section;
*) switch — improved system stability with 98PX1012 switch chip for CCR2004-1G-12S+2XS device;
*) system — improved resource allocation (improves several service stability e.g. HTTPS, PPPoE, VPN);
*) telnet — do not send options if connecting to non standard port;
*) telnet — fixed server when run on non standard port;
*) tile — fixed bridge performance degradation (introduced in v6.47);
*) tr069-client — improved management service stability when receiving bogus packets;
*) upgrade — improved «long-term» upgrade procedure on SMIPS devices;
*) webfig — allow to specify «prefix» parameter under «IPv6/ND/Prefixes» menu;
*) webfig — do not corrupt settings when starting «Wireless Sniffer»;
*) webfig — do not move top right menu in opposite direction when scrolling horizontally;
*) webfig — show «network-mode» for LTE modems that support it;
*) winbox — do not show «network-mode» parameter for LTE interfaces that do not support it;
*) winbox — do not show empty «CPU Frequency» parameter under «System/Resources» menu;
*) winbox — fixed «reachable-time» value unit under «IPv6/ND» menu;
*) winbox — fixed QCA-8511 switch chip type reporting under «Switch/Settings» menu;
*) winbox — fixed health reporting on RB960, hEX and hEX S devices;
*) winbox — hide «Allow Roaming» parameter on LTE modems that do not support it;
*) winbox — increased «target» field limit to 128 under «Queues» menu;
*) winbox — show «LCD» only on boards that have LCD;
*) winbox — show «System/Health» only on boards that have health monitoring;
*) winbox — show «activity» column by default under «IP/Kid Control/Devices» menu;
*) wireless — fixed issue with multicast traffic delivery to client devices using power-save;
*) wireless — improved iOS compatibility with HotSpot 2.0 networks;
*) www — added «X-Frame-Options» header information to disallow website embedding in other pages;