Описание прошивки MikroTik RouterOS 7.3

Компания MikroTik обновила версию прошивки на канале stable до версии 7.3

Прошивку можно скачать с сайта https://mikrotik.com/download

Дата выхода прошивки: 06.06.2022

Версия прошивки 7.3 содержит такие доработки и исправления:

What’s new in 7.3 (2022-Jun-06 11:38):

*) bgp – added “name” parameter for connections;
*) bgp – added initial support for prefix limit;
*) bgp – fixed “keepalive-timeout” value when upgrading from RouterOS v6;
*) bgp – fixed “l2vpn” distribution;
*) bgp – improved stability when editing BGP template;
*) bgp – moved “interface bgp-vpls” menu to “routing bgp vpls”;
*) bgp – remove unused commands and parameters;
*) bluetooth – improved long-term service stability;
*) bonding – added “lacp-user-key” setting;
*) bonding – fixed LACP flapping for RB5009 and CCR2004-16G-2S+ devices;
*) bridge – added more details for loop detection warning;
*) bridge – do not set VLAN on inactive port with a “set” command;
*) bridge – fixed TCP, UDP port parsing for loop detect warning;
*) bridge – fixed packet marking for IP/IPv6 firewall;
*) bridge – ignore VLAN tagged BPDU;
*) capsman – fixed bridge disabling when using L2 connection;
*) capsman – fixed loss of manager configuration when “package-path” is set to external disk;
*) capsman – improved traffic processing over CAP communication tunnels:
*) ccr – added “passthrough” flag for interfaces on CCR2004-1G-2XS-PCIe;
*) ccr – added visible “passthrough” flag for interfaces on CCR2004-1G-2XS-PCIe;
*) ccr – improved interface link stability on CCR2004-16G-2S+PC;
*) ccr – usability and stability improvements for passthrough interfaces on CCR2004-1G-2XS-PCIe;
*) cd-install – allow selecting on which drive to install RouterOS;
*) chr – fixed Cloud DDNS update after license renewal;
*) conntrack – limited full Connection Tracking warning to 1 message per minute;
*) console – fixed “terminal inkey” command;
*) crs1xx/2xx – improved system stability during switch reset;
*) defconf – do not add passthrough ports to local bridge on CCR2004-1G-2XS-PCIe;
*) dhcpv4-server – added “age” parameter for dynamic leases;
*) dhcpv4-server – fixed conflicting or declined lease detection when IP pool differs from server’s configuration;
*) dhcpv4-server – fixed minor logging typo;
*) dot1x – fixed RADIUS State attribute when client is reauthenticated;
*) dot1x – fixed port based VLAN ID assignment on devices without a switch chip;
*) dot1x – improved server stability when using re-authentication;
*) export – fixed value ID exporting that does not refer to any name;
*) fetch – fixed SFTP upload;
*) fetch – improved full disk detection;
*) filesystem – fixed possible boot failure on RB850Gx2 and RB1100AHx2;
*) filesystem – improved UBIFS stability and data integrity after downgrade to RouterOS v6 and upgrade to RouterOS v7;
*) filesystem – improved long-term filesystem stability and data integrity;
*) gps – added GPS package support for Chateau devices;
*) gps – fixed minor value unit typo;
*) ipsec – fixed IPsec IRQ initialization on startup on TILE;
*) ipsec – fixed printing of active peer statistics;
*) ipv6 – added “ra-preference” parameter support for RA;
*) ipv6 – fixed dynamic non link-local addresses displaying;
*) ipv6 – removed bogus commands from IPv6 neighbors menu;
*) l2tp – added VRF support for L2TP client;
*) l3hw – greatly improved route offloading speed;
*) l3hw – improved offloading for directly connected hosts on CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310;
*) l3hw – improved offloading in cases of HW table overflow for CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310;
*) l3hw – improved route table offloading for CRS317, CRS309, CRS312, CRS326-24S+2Q+, CRS354, CRS5xx, CCR2x16 devices;
*) l3hw – log HW routes count and the shortest offloaded subnet prefix if the HW memory gets full;
*) l3hw – offload only main routing table;
*) l3hw – optimized offloading when dealing with large volume of directly connected hosts;
*) l3hw – partial routing table offload for Marvell Prestera DX4000/DX8000 switch chip series;
*) leds – fixed ethernet LED behavior on wAP R ac;
*) leds – fixed wireless related LED behavior with WW2 package;
*) lhgg – improved system stability (introduced in v7.2);
*) lora – do not allow setting non-existing forwarding server;
*) lora – fixed bogus TOO_EARLY errors;
*) lora – removed TX lookup table;
*) lte – added SMS sending support for MBIM protocol;
*) lte – added support for generic PXA1802 based modems;
*) lte – allow only MCC/NMC format in “operator” parameter;
*) lte – clear SIM values when modem in “stopped” state;
*) lte – disabled extended signal info query for Telit LN940 module;
*) lte – disabled wait for LTE auto attach;
*) lte – expose diagnostics channel for all modems;
*) lte – fixed LTE firwmare upgrade on RBLtAP-2HnD with R11e-LTE6;
*) lte – fixed Sierra MC7455 modem initialization;
*) lte – hide slave interfaces from export;
*) lte – improved LTE interface initialization process on LtAP-2HnD;
*) lte – improved stability when configuring multiple APN’s at the same time in MBIM mode;
*) lte – improved stability when upgrading LTE firmware on Chateau 5G;
*) mlag – fixed MAC address moving between bridge ports;
*) mpls – do MPLS forwarding for nexthops without mappings;
*) mpls – fixed MPLS MTU and path MTU selection;
*) mpls – fixed MPLS forwarding after any interface configuration parameter is changed;
*) mpls – improved LDP AF selection process and behavior;
*) mpls – made LDP bindings work on PPP interfaces;
*) ntp – do not allow setting port number in “server” parameter;
*) ntp – fixed “use-local-clock” behavior when enabling server;
*) ospf – fixed GRE interface compatibility with OSPF;
*) ospf – ignore instance route when originate-default=if-installed is enabled;
*) ospf – improved stability when enabling or removing interface-template entries;
*) ovpn – adjusted SHA2 authentication algorithm naming to allow legacy OpenVPN implementations to connect;
*) ovpn – fixed hardware offloading support on CHR;
*) ovpn – fixed memory leak on TILE architecture;
*) ovpn – fixed packet processing on MT7621A;
*) ovpn – fixed server instance not responding to incoming connections after reboot on CHR;
*) ovpn – improved Windows client disconnect procedure in UDP mode;
*) ovpn – improved server stability under continous overload;
*) ovpn – improved service stability when outbound packets are blocked by firewall in UDP mode;
*) ovpn – improved service stability when processing frequent disconnects in UDP mode;
*) ovpn – improved stability when forwarding traffic on TILE;
*) ovpn – moved authentication failure messages to “info” logging level;
*) ovpn – reply with the same IP address that the connection was established to;
*) ping – fixed socket allocation after VRF change;
*) port – do not loose “parity” setting;
*) ppp – added support for VRF;
*) ppp – added warning when using prefix length other than /64 for router advertisement;
*) ppp – fixed “remote-ipv6-prefix” parameter unsetting;
*) ppp – fixed active sessions sometimes getting stuck;
*) ppp – fixed issue with multiple active sessions when “only-one” is enabled;
*) profile – added “wireguard” process classificator;
*) profile – added “zerotier” process classificator;
*) qsfp – reset module only when all ports are disabled;
*) queue – allow to set higher limits than 4G;
*) queue – display warning for CAKE type in simple and tree setups when “bandwidth” parameter is configured;
*) queue – improved stability in large list of queue scenarios;
*) rb5009 – fixed 10G linking issues with Intel X520, XXV710 NICs;
*) resource – fixed CPU type display under system resources for ARM and ARM64;
*) romon – fixed VLAN tagged packet processing;
*) route – fixed “nexthop” table printing;
*) route – fixed “table” menu emptying after RouterOS upgrade;
*) route – fixed IPv6 /127 route nexthop resolution;
*) route – fixed static routes in VRF becoming invalid after reboot;
*) route-filter – fixed community matchers;
*) routerboard – fixed USB bus numbering on LtAP and M33G;
*) routerboot – added extra shortcut information on how to boot into etherboot;
*) routerboot – prevent enabling “protected-routerboot” on unsupported factory firmware versions;
*) routerboot – properly reset system configuration when protected bootloader is enabled and reset button used;
*) rsvp-te – improved stability when “Resv” received for non-existing session;
*) sfp – added 2.5Gbps rate for SFP+ and QSFP+ interfaces on 98DXxxxx and 98PX1012 switches (requires disabled auto-negotiation);
*) sfp – hide empty monitor values in console;
*) sfp – improved Q/SFP interface initialization and stability for 98DXxxxx and 98PX1012 switches;
*) sfp – improved QSFP/SFP interface initialization for 98DXxxxx switches;
*) smb – fixed SMB2 file list reporting;
*) snmp – added VRF support (CLI only);
*) snmp – added VRF support;
*) snmp – fixed reported disk size when multiple external disks are attached;
*) snmp – hide Vendor ID in DHCP MIB when branding is present;
*) snmp – report “ifSpeed” as 0 if value out of bounds (use “ifHighSpeed” for high speed interfaces instead);
*) ssh – added AES-GCM cipher support;
*) ssh – fail non-interactive client after first invalid password;
*) ssh – fixed corrupt host key automatic regeneration;
*) ssh – fixed private key usage after downgrade;
*) ssh – removed DSA public key authentication support;
*) supout – added IGMP-Proxy section;
*) supout – added NTP servers section;
*) supout – added PIMSM section;
*) supout – added RIP section;
*) supout – added WireGuard section;
*) supout – added simplified IPv4 and IPv6 routing table prints;
*) switch – added option to match source and destination IP addresses in ARP packets for RB5009 (requires mac-protocol=arp setting);
*) switch – fixed missing stats from traffic-monitor for 98DXxxxx and 98PX1012 switches;
*) system – fixed IP service initialization in VRF after system startup;
*) system – fixed Kernel timer consistency;
*) system – fixed rare partial loss of RouterOS configuration after package upgrade/downgrade/install/uninstall;
*) torch – properly capture all related IPv6 traffic;
*) tr069-client – fixed RPC download of “1 Vendor Configuration File” with branding package;
*) tunnels – improved packet handling over EoIP, IPIP and GRE tunnels;
*) upnp – improved stability when processing incomplete HTTP header;
*) user-manager – added “Acct-Interim-Interval” to predefined attribute list;
*) user-manager – improved stability when received EAP attribute with non-existing state attribute;
*) vpls – fixed “pw-l2mtu” parameter usage;
*) vpls – fixed TE transport path usage after startup;
*) vrrp – fixed learning of bridged local MAC addreses;
*) w60g – improved stability on Cube 60Pro ac and CubeSA 60Pro ac;
*) webfig – properly show all routing table content;
*) wifiwave2 – fixed VLAN tag handling;
*) wifiwave2 – general stability and throughput improvements;
*) winbox – added “Comment” parameter for BGP templates and connections;
*) winbox – added “Default Cost” parameter under “Routing/OSPF/Area” menu;
*) winbox – added “ra-preference” parameter under “IPv6/ND” menu;
*) winbox – added SKID and AKID parameters under “Certificate” menu;
*) winbox – added missing “IBGP”, “EBGP”, “Limit Exceeded” and “Stopped” parameters under “Routing/BGP/Sessions” menu;
*) winbox – added missing “Keep Sent Attributes” parameter under “Routing/BGP/Connection” menu;
*) winbox – added missing “Scan List” parameter for W60G interfaces;
*) winbox – added missing BGP session commands;
*) winbox – added support for 2.5Gbps and 100Gbps Ethernet speed options;
*) winbox – added warning message for LTE upgrade process;
*) winbox – do not auto start Wireless Sniffer when opened;
*) winbox – do not show “Session Uptime” parameter under “LTE” menu if not supported by modem;
*) winbox – do not show “unknown” area under “Routing/OSPF/LSA” menu;
*) winbox – do not show type value for NXDOMAIN entries under “IP/DNS/Cache” menu;
*) winbox – fixed “Disconnect Timeout” parameter type under “CAPsMAN” menu;
*) winbox – fixed “IP/Cloud” window refreshing after changes are detected;
*) winbox – fixed “Type” values under “IP/Route” menu;
*) winbox – fixed graph drawing in QuickSet;
*) winbox – fixed hex type values under “User Manager” menu;
*) winbox – fixed minor typo in reboot confirmation prompt;
*) winbox – fixed typo in ZeroTier instance title;
*) winbox – made “Interface Templates” table sortable under “Routing/OSPF” menu;
*) winbox – made “MPLS Interface” table sortable under “MPLS” menu;
*) winbox – made 56 the default ping size;
*) winbox – made wireless access list entries sortable when using the wifiwave2 package;
*) winbox – minimal required version is v3.33;
*) winbox – moved “src-address-list” and “dst-address-list” parameters to “General” tab under “IP/Firewall” menu;
*) winbox – moved “src-address-list” and “dst-address-list” parameters to “General” tab under “IPv6/Firewall” menu;
*) winbox – properly clean up SFP module information after it is unplugged;
*) winbox – properly clean up disk after a failed file upload;
*) winbox – properly load band values under “LTE” menu;
*) winbox – removed obsolete “Routing Table” parameter under “IP/Firewall” menu;
*) winbox – show “System/RouterBOARD/Mode Button” on devices that have such feature;
*) winbox – show PVID column by default under “Bridge” menu;
*) winbox – show correct file system type under “System/Disks” menu;
*) winbox – take into account timezone for timed values under “User Manager” menu;
*) wireless – fixed “wmm-support=required” checking;
*) wireless – fixed EAP-TLS authentication;
*) wireless – fixed GUD version in 3gpp information;
*) x86 – added support for Solarflare SFC1920 NIC;
*) x86 – fixed soft-id reading on virtualized x86 installations (introduced in v7.2);
*) x86 – improved support for Intel E810 NIC;
*) zerotier – added support for Controller configuration;

Как обновить прошивку MikroTik RouterOS stable 7.3

Самый доступный метод обновление прошивки – через Winbox или web интерфейс(раздел Webfig).

  1. Перейти в раздел System→Packages;
  2. Нажать кнопку Check For Updates;
  3. Установить параметр Channel = long term;
  4. Нажать кнопку Download&Install.

Как обновить прошивку MikroTik Routes OS 7.3Также можно воспользоваться окном Терминала(Terminal) в Winbox.